View G150XG01V2_1576470.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

avnet embedded. support aro und the b oard ? www.avnet-embedded.eu datasheet auo g150xg01-v2 avn et em bedded sp e cific at ion. www..net
g150xg01 v2 rev 0.0 1/27 g150xg01 v2 ( ) preliminary specifications (v) final specifications module 15 inch color tft-lcd model name g150xg01 v2 customer date checked & approved by note: this specification is subject to change without notice. approved by date debbie chiu 2008/04/24 prepared by danny wang 2008/04/24 general display business division / au optronics corporation auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 2/27 g150xg01 v2 contents 1. operating precautions........................... ................................................... .......4 2. general description ............................. ................................................... .........5 2.1 display characteristics.................................... ................................................... ....................5 2.2 optical characteristics .................................... ................................................... ....................6 3. functional block diagram ........................ ................................................... ....9 4. absolute maximum ratings ........................ ..................................................1 0 4.1 absolute ratings of tft lcd module .............................. ................................................... 10 4.2 absolute ratings of environment ................................. ................................................... ....10 5. electrical characteristics ...................... ................................................... .....11 5.1 tft lcd module ........................................ ................................................... ....................... 11 5.2 backlight unit......................................... ................................................... ............................13 6. signal characteristic ........................... ................................................... .......14 6.1 pixel format image ...................................... ................................................... .....................14 6.2 scanning direction ........................................ ................................................... ....................14 6.3 signal description ....................................... ................................................... ......................15 6.4 the input data format ...................................... ................................................... ................16 6.5 interface timing ........................................ ................................................... .........................17 6.6 power on/off sequence ..................................... ................................................... ...........18 7. connector & pin assignment ...................... ..................................................1 9 7.1 tft lcd module: lvds connector............................... ................................................... ...19 7.2 backlight unit: led connector ................................. ................................................... ........21 7.3 led connector pin assignment ................................... ................................................... ....21 8. reliability test criteria ........................ ................................................... .......22 9. mechanical characteristics ...................... ................................................... ..23 9.1 lcm front view and rear view................................. ................................................... .......23 9.2 lcm outline dimension (front view) ............................. ................................................... ..24 9.3 lcm outline dimension (rear view).............................. ................................................... ..25 10. label and packaging............................ ................................................... .....26 10.1 shipping label (on the rear side of tft-lcd display) ..................... .................................26 10.2 carton package ........................................... ................................................... ...................26 11 safety.......................................... ................................................... ................27 11.1 sharp edge requirements..................................... ................................................... .........27 11.2 materials ........................................... ................................................... ...............................27 11.3 capacitors.......................................... ................................................... ..............................27 11.4 national test lab requirement.................................. ................................................... .....27 auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 3/27 g150xg01 v2 record of revision version and date page old description new description 0.0 2009/04/24 all first edition auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 4/27 g150xg01 v2 1. operating precautions 1) since front polarizer is easily damaged, please be cautious and not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or soft cloth. 5) since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at the back of the module to any direction. 9) in case if a module has to be put back into the packing container slot after it was taken out from the container, do not press the center of the led reflector edge. instead, press at the far ends of the led reflector edge softly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) tft-lcd module is not allowed to be twisted & bent even force is added on module in a very short time. please design your display product well to avoid external force applying to module by end-user directly. 12) small amount of materials without flammability grade are used in the tft-lcd modul e. the tft-lcd module should be supplied by power complied with requirements of limited power source (iec60950 or ul1950), or be applied exemption. 13) severe temperature condition may result in different luminance, response time. 14) continuous operating tft-lcd module under high temperature environment may accelerate led light bar exhaustion and reduce luminance dramatically. 15) the data on this specification sheet is applicable when tft-lcd module is placed in landscape position. 16) continuous displaying fixed pattern may induce image sticking. its recommended to use screen saver or moving content periodically if fixed pattern is displayed on the screen. auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 5/27 g150xg01 v2 2. general description g150xg01 v2 is a color active matrix liquid crystal display composed of a tft-lcd displ ay, a driver circuit, and a backlight system. the screen format is intended to support xga (1024(h) x 768(v)) screen and 16.2m (rgb 8-bits) or 262k colors (rgb 6-bits). all input sig nals are lvds interface compatible. all design rules of this modu le can correspond to pswg standard. g150xg01 v2 is designed for industrial display applications. 2.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [inch] 15 active area [mm] 304.128(h) x 228.096(v) pixels h x v 1024x3(rgb) x 768 pixel pitch [mm] 0.297 x 0.297 pixel arrangement r.g.b. vertical stripe display mode tn, normally white nominal input voltage vdd [volt] 3.3 typ. typical power consumption [watt] 8.8 ( 64 gray bar pa ttern , exclude inverter) weight [grams] 1100g (max.) physical size [mm] 326.5(h)x 253.5(v) x 12.0(d) (max.) electrical interface 1 channel lvds surface treatment anti-glare, hardness 3h support color 16.2m / 262k colors temperature range operating storage (non-operating) [ o c] [ o c] 0 to +65 (+65 o c as panel surface temperature) -20 to +65 rohs compliance rohs compliance auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 6/27 g150xg01 v2 2.2 optical characteristics the optical characteristics are measured under stable co nditions at 25 (room temperature): item unit conditions min. typ. max. note white luminance [cd/m2] i f = 80ma (center point) 300 350 - 1 uniformity % 9 points 75 80 - 1, 2, 3 contrast ratio 400 700 - 4 cross talk % - 1.2 1.5 5 [msec] rising - 5.7 [msec] falling - 2.3 response time [msec] raising + falling - 8 6 [degree] [degree] horizontal (right) cr = 10 (left) 70 70 80 80 - - viewing angle [degree] [degree] vertical (upper) cr = 10 (lower) 70 50 80 60 - - 7 red x 0.584 0.634 0.684 red y 0.297 0.347 0.397 green x 0.277 0.327 0.377 green y 0.560 0.610 0.660 blue x 0.102 0.152 0.202 blue y 0.022 0.072 0.122 white x 0.263 0.313 0.363 color / chromaticity coordinates (cie 1931) white y 0.279 0.329 0.379 color gamut % 65 - note 1: measurement method equipment pattern generator, power supply, digital voltmeter, luminance meter (sr_3 or equivalent) aperture 1 w i t h 50cm viewing distance test point center environment < 1 lux lcd module sr_3 or equivalent measuring distance module driving equipment auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 7/27 g150xg01 v2 note 2: definition of 9 points position (display act ive area : 304.128(h) x 228.096(v)) note 3: the luminance uniformity of 9 points is defi ned by dividing the minimum luminance values by the maximum test point luminance note 4 definition of contrast ratio (cr): note 5 definition of cross talk (ct) ct = | yb C ya | / ya 100 (%) where ya = luminance of measured location without gray leve l 0 pattern (cd/m2) yb = luminance of measured location with gray level 0 pattern (cd/m2) minimum brightnes s of nine poin ts w9 = m aximum bri ghtness of nine points contrast ratio (cr)= brightness on the white state brightness o n the black state 50 % 90 % 90 % 50 % 10 % 10 % 1/2 1/2 1/6 1/6 a b 1/2 1/2 1/6 1/6 2/3 1/3 1/3 2/3 a b 184 gray level auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 8/27 g150xg01 v2 note 6: definition of response time: the output signals of photo detector are measured wh en the input signals are changed from white to bla ck (falling time) and from black to white (rising tim e), respectively. the response time interval is betw een 10% and 90% of amplitudes. please refer to the figure as be low. note 7: definition of viewing angle v i e w i n g a n g l e i s t h e m e a s u r e m e n t o f c o n t r a s t r a t i o 1 0 , a t t h e s c r e e n c e n t e r , o v e r a 1 8 0 h o r i z o n t a l a n d 1 8 0 vertical range (off-normal viewing angles). the 180 viewing angle range is broken down as below: 90 ( ) horizontal left and right, and 90 () vertical high (up) and l ow (down). the measurement direction is typically per pendicular to the display surface with the screen rotated to its center to develop the desired measurement viewing angle. 100 90 10 0 % optical response white black white tf tr 90 10 0 optical response white black white tr auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 9/27 g150xg01 v2 3. functional block diagram the following diagram shows the functional block of the 15 inch color tft/lcd module: 3804-f20n-06r / msb240420e sm06b-srss-tb(lf)(sn) mating type : hrs df14-20s-1.25c shr-06v-s-b led b/l connector lvds receiver timing controller led driver dc power au asic rsds lvds + 3.3v tft-lcd 1024(3)*768 pixels y - driver ic g1 g768 d1 d3072 gate driver ic source driver ic dc/dc converter gamma correction auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 10/27 g150xg01 v2 4. absolute maximum ratings 4.1 absolute ratings of tft lcd module item symbol min max unit logic/lcd drive voltage vin - 0.3 + 4.0 [volt] 4.2 absolute ratings of environment item symbol min max unit operating temperature top 0 +65 [ o c] operation humidity hop 8 90 [%rh] storage temperature tst -20 +65 [ o c] storage humidity hst 8 90 [%rh] note: maximum wet- b u l b s h o u l d b e 3 9 a n d n o c o n d e n s a t i o n . * 65 o c is panel surface temperature t=40 c, h=95% t=65 c, h=27.9% auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 11/27 g150xg01 v2 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification symbol parameter min typ max units remark vdd logic/lcd drive voltage 3.0 3.3 3.6 [volt] 10% idd vdd current - 550 660 [ma] 64 gray bar pattern (vdd=3.3v, at 60hz) i rush lcd inrush current - - 3 [a] note 1 pdd vdd power - 1.9 2.2 [watt] 64 gray bar pattern (vdd=3.3v, at 60hz) note 1: measurement condition: q3 ao6402 g d2 s d1 d5 d6 q3ao6402 g d2 s d1 d5 d6 c11uf/16v c21uf/25v c30.01uf/25v f1 vr1 47k +12.0v vcc sw1 sw mag-spst 1 2 (high to low)control signal (lcd module input) r21k +3.3v r147k r21k 90% 10% vdd rising time 0v 3.3v 470 us vdd 64 gray pattern auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 12/27 g150xg01 v2 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vdd is off. note: lvds signal waveform. symbol item min. typ. max. unit remark vth differential input high threshold - - 100 [mv] vcm=1.2v vtl differential input low threshold -100 - - [mv] vcm=1.2v vid input differential voltage 100 400 600 [mv] vicm differential input common mode voltage 1.1 1.45 [v] vth/vtl= 100mv auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 13/27 g150xg01 v2 5.2 backlight unit 5.2.1 parameter guideline for led following characteristics are measured under stable con dition using a led driving board at 25 ( r o om temperature). symbol parameter min typ max unit remark i f led forward current - 80 84 ma ta = 25 o c - 30.6 - volt i f = 80ma, ta = -30 o c - 28.8 32.85 volt i f = 80ma, ta = 25 o c v f led forward voltage - 27.9 - volt i f = 80ma, ta = 85 o c p led led power - 6.9 - watt operating life 50000 hrs i f = 80ma, ta = 25 o c note 1: ta means ambient temperature of tft-lcd mod ule. note 2: if g150xg01 v2 module is driven by high curre nt or at high ambient temperature & humidity conditi on. the operating life will be reduced. note 3: operating life means brightness goes down t o 50% initial brightness. typical operating life tim e is estimated data. auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 14/27 g150xg01 v2 6. signal characteristic 6.1 pixel format image following figure shows the relationship between inp ut signal and lcd pixel format. 6.2 scanning direction the following figures show the image seen from the front view. the arrow indicates the direction of scan. fig. 1 normal scan (pin4, rev = low or nc) fig. 2 reverse scan (pin4, rev = high) auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 15/27 g150xg01 v2 6.3 signal description the module using a pair of lvds receiver sn75lvds82( texas instruments) or compatible. lvds is a different ial signal technology for lcd interface and high speed da ta transfer device. transmitter shall be sn75lvds83( negative edge sampling) or compatible . the first lvds port(rxoxxx) transmits odd pixels wh ile the second lvds port(rxexxx) transmits even pixels. 3804-f20n-06r (e&t) / msb240420e(stm) pin no. symbol description 1 vdd power supply, 3.3v (typical) 2 vdd power supply, 3.3v (typical) 3 vss ground 4 rev reverse scan selection *.note1 5 rin1- - lvds differential data input (r0-r5, g0) 6 rin1+ + lvds differential data input (r0-r5, g0) 7 vss ground 8 rin2- - lvds differential data input (g1-g5, b0-b1) 9 rin2+ + lvds differential data input (g1-g5, b0-b1) 10 vss ground 11 rin3- - lvds differential data input (b2-b5, hs, vs, de) 12 rin3+ + lvds differential data input (b2-b5, hs, vs, de) 13 vss ground 14 clkin- - lvds differential clock input 15 clkin+ + lvds differential clock input 16 gnd ground 17 rin4- - lvds differential data input (r6-r7, g6-g7,b6-b7) 18 rin4+ - lvds differential data input (r6-r7, g6-g7,b6-b7) 19 vss ground 20 sel68 selection for 6 bits/8bits lvds data input *note1 note 1: input signals shall be in low status when vd d is off. auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 16/27 g150xg01 v2 6.4 the input data format 6.4.1 sel68 sel68 = high or nc for 6 bits lvds input g0 r5 r4 r3 r2 r1 r0 de vs hs b5 b4 b3 b2 b1 b0 g5 g4 g3 g2 g1 rxclkin rxin1 rxin2 rxin3 sel68 = low for 8 bits lvds input g0 r5 r4 r3 r2 r1 r0 rsv b7 b6 g7 g6 r7 r6 de vs hs b5 b4 b3 b2 b1 b0 g5 g4 g3 g2 g1 rxclkin rxin1 rxin2 rxin3 rxin4 note1 : please follow pswg. note2 : r/g/b data 7:msb, r/g/b data 0:lsb signal name description remark r7 r6 r5 r4 r3 r2 r1 r0 red data 7 red data 6 red data 5 red data 4 red data 3 red data 2 red data 1 red data 0 red-pixel data for 8bits lvds input msb: r7 ; lsb: r0 for 6bits lvds input msb: r5 ; lsb: r0 g7 g6 g5 g4 g3 g2 g1 g0 green data 7 green data 6 green data 5 green data 4 green data 3 green data 2 green data 1 green data 0 green-pixel data for 8bits lvds input msb: g7 ; lsb: g0 for 6bits lvds input msb: g5 ; lsb: g0 b7 b6 b5 b4 b3 b2 b1 b0 blue data 7 blue data 6 blue data 5 blue data 4 blue data 3 blue data 2 blue data 1 blue data 0 blue-pixel data for 8bits lvds input msb: b7 ; lsb: b0 for 6bits lvds input msb: b5 ; lsb: b0 rxclkin lvds data clock de data enable signal when the signal is high, the p ixel data shall be valid to be displayed. vs vertical synchronous signal hs horizontal synchronous signal note: output signals from any system shall be low o r hi-z state when vdd is off. auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 17/27 g150xg01 v2 6.5 interface timing 6.5.1 timing characteristics signal parameter symbol min. typ. max. unit clock timing clock frequency 1/ t clock 50 65 81 mhz period t v 776 806 1024 active t vd 768 768 768 vsync timing vertical section blanking t vb 8 38 256 t line period t h 1054 1344 2048 active t hd 1024 1024 1024 hsync timing horizontal section blanking t hb 30 320 1024 t clock note: frame rate is 60 hz. note: de mode. note : typical value refer to vesa standard 6.5.2 input timing diagram dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild data invaild data pixel 1 auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 18/27 g150xg01 v2 6.6 power on/off sequence vdd power and led on/off sequence is as below. interf ace signals are also shown in the chart. signals from any system shall be hi-z state or low level when vdd is off. power on/off sequence timing value parameter min. typ. max. units t1 0.5 - 10 ms t2 0 40 50 ms t3 200 - - ms t4 200 - - ms t5 0 16 50 ms t6 0 - 10 ms t7 1000 - - ms the above on/off sequence should be applied to avoid abnormal function in the display. please make sure t o turn off the power when you plug the cable into the input conn ector or pull the cable out of the connector. t7 t 5 t2 t3 valid data t1 10% 90% 10% 90% t4 t 6 power supply vdd lvds signal backlight on auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 19/27 g150xg01 v2 7. connector & pin assignment physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following componen ts. 7.1 tft lcd module: lvds connector connector name / designation signal connector manufacturer e&t or compatible connector model number 3804-f20n-06r / msb240420e adaptable plug hrs df14-20s-1.25c pin# signal name pin# signal name 1 vdd 2 vdd 3 vss 4 rev 5 rin1- 6 rin1+ 7 vss 8 rin2- 9 rin2+ 10 vss 11 rin3- 12 rin3+ 13 vss 14 clkin- 15 clkin+ 16 gnd 17 rin4- 18 rin4+ 19 vss 20 sel68 auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 20/27 g150xg01 v2 7.1.1 connector illustration sel68 auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 21/27 g150xg01 v2 7.2 backlight unit: led connector connector name / designation led connector manufacturer jst or compatible connector model number sm06b-srkhfs-tb(lf)(sn)or comp atible mating model number shr-06v-bkhf-b or compatible 7.3 led connector pin assignment pin# symbol signal name 1 +ch3 power supply for led (ch3 high voltage side) 2 +ch2 power supply for led (ch2 high voltage side) 3 +ch1 power supply for led (ch1 high voltage side) 4 -ch1 power supply for led (ch1 low voltage side) 5 -ch2 power supply for led (ch2 low voltage side) 6 -ch3 power supply for led (ch3 low voltage side) auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 22/27 g150xg01 v2 8. reliability test criteria items required condition note temperature humidity bias 5 0 / 80%,300 hours high temperature operation 60 ,300 hours low temperature operation 0 ,300 hours hot storage 65 , 3 0 0 h o u r s cold storage - 2 0 , 3 0 0 h o u r s thermal shock test - 2 0 / 3 0 m i n , 6 0 / 3 0 m i n , 1 0 0 c y c l e s shock test (non-operating) 50g,20ms,half-sine wave,( x, y, z) vibration test (non-operating) 1.5g, (10~200hz, p-p) 30 mins/axis (x, y, z) on/off test on/10 sec, off/10 sec, 30,000 cycles esd contact discharge: 8kv, 150pf(330? ) 1sec, 8 points, 25 times/ point air discharge: 15kv, 150pf(330? ) 1sec, 8 points, 25 times/ point note 1 note1: according to en61000-4-2, esd class b: some performance degradation allowed. no data lost . self-recoverable. no hardware failures. auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 23/27 g150xg01 v2 9. mechanical characteristics 9.1 lcm front view and rear view auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 24/27 g150xg01 v2 9.2 lcm outline dimension (front view) auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 25/27 g150xg01 v2 9.3 lcm outline dimension (rear view) auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 26/27 g150xg01 v2 10. label and packaging 10.1 shipping label (on the rear side of tft-lcd display) 10.2 carton package max capacity: 15 tft-lcd module per carton (12pcs * 1 layers) max weight: 20 kg per carton outside dimension of carton: 375(l)mm* 430(w)mm* 353( h)mm auo confidential for avnet_europe internal use only / 2010/1/15 www..net
g150xg01 v2 rev 0.0 27/27 g150xg01 v2 11 safety 11.1 sharp edge requirements there will be no sharp edges or comers on the displa y assembly that could cause injury. 11.2 materials 11.2.1 toxicity there will be no carcinogenic materials used anywhere in the display module. if toxic materials are used, they will be reviewed and approved by the responsib le auo toxicologist. 11.2.2 flammability all components including electrical components that do n ot meet the flammability grade ul94-v1 in the module will complete the flammability rating exceptio n approval process. the printed circuit board will be made from material rated 94-v1 or better. the actual ul flammability rating will be printed on the printed circuit board. 11.3 capacitors if any polarized capacitors are used in the display ass embly, provisions will be made to keep them from being inserted backwards. 11.4 national test lab requirement the display module will satisfy all requirements fo r compliance to: ul 1950, first edition u.s.a. information technology equipment auo confidential for avnet_europe internal use only / 2010/1/15 www..net
avn et em bedded offic es. loc al avn et em bedded bu s in esses : 03/2010 www.avnet-embedded.eu all trademarks and logos are the property of their respective owners. this document provides a brief overview only and is not intended to be complete or binding offer. product information, including information related to a products specifications, uses or conformance with legal or other requirements, is obtained by avnet from its suppliers or other sources deemed reliable and is provided by avnet on an ?as is basis. avnet makes no representation as to the accuracy or completeness of the product information and avnet disclaims all representations, warranties and liabilities under any theory with respect to the product information, including any implied warranties of merchantability, fitness for a particular purpose, title and/or non- refringement. all product information is subject to change without notice. d e nm a rk trident avnet nortec a/s banemarksvej 50b, 1 2605 broendby phone: +45 3678 6250 fax: +45 3678 6255 trident-denmark @ avnet-embedded.eu f in la n d trident avnet nortec oy tiilenpolttajankuja 3 a b 1720 vantaa phone: +358 207 499260 fax: +358 942 597446 trident-finland @ avnet-embedded.eu f r a nce axess technology avnet emg france sa immeuble 154, parc chene 2 5, alle du general benoist 69000 bron phone: +33 4 72 81 02 30 fax: +33 4 72 81 02 34 axess-bron @ avnet-embedded.eu axess technology avnet emg france sa 4, rue de la couture batiment milan, bp 20209 94518 rungis cedex phone: +33 1 49 78 88 88 fax: +33 1 49 78 88 89 axess-rungis @ avnet-embedded.eu axess technology avnet emg france sa za la hallerais le semiramis 2, alle du communel 35770 vern sur seiche phone: +33 2 99 77 37 02 fax: +33 2 99 77 33 38 axess-rennes @ avnet-embedded.eu ge rm a n y (a u st ri a, c ze c h r e pu bl ic , h un ga r y, po la n d, sw i tze r la n d) avnet embedded avnet emg gmbh gruber stra?e 60c 85586 poing phone: +49 8121 775 500 fax: +49 8121 775 550 poing @ avnet-embedded.eu avnet embedded avnet emg gmbh l?tscher weg 66 41334 nettetal phone: +49 8121 775 500 fax: +49 8121 775 550 nettetal @ avnet-embedded.eu italy avnet embedded avnet emg italy srl via manzoni, 44 20095 cusano milanino phone: +39 02 66092 1 fax: +39 02 66092 498 milano @ avnet-embedded.eu n ethe r la n ds (belg ium , l u xe m b our g) avnet embedded avnet b.v. takkebijsters 2 4802 bl breda phone: +31 76 5722400 fax: +31 76 5722404 benelux @ avnet-embedded.eu sp a in avnet embedded avnet iberia sa c/chile, 10 - edificio madrid 92 28290 las matas (madrid) phone: +34 91 372 7142 fax: +34 91 636 9788 madrid @ avnet-embedded.eu swede n ( nor way) trident avnet nortec ab esplanaden 3 d 172 67 sundbyberg phone: +46 8 564 725 50 fax: +46 8 760 01 10 trident-sweden @ avnet-embedded.eu uni ted kin gd om ( ir ela n d) tdc avnet emg ltd. pilgrims court, 15/17 west street reigate, surrey, rh2 9bl phone: +44 1737 227888 fax: +44 1737 243872 tdc @ avnet-embedded.eu trident avnet emg ltd. pilgrims court, 15/17 west street reigate, surrey, rh2 9bl phone: +44 1737 227800 fax: +44 1737 244698 trident-uk @ avnet-embedded.eu www..net

▲Up To Search▲

Price & Availability of G150XG01V2

	To Download G150XG01V2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .